What to Do When You Have a Blocked Toilet

A blocked toilet can be a hassle and can leave you feeling helpless. Luckily, there are several things you can do. There are many ways to unclog a toilet, including using a plunger, but you don’t necessarily need to buy one. If you have a plunger, you can try it but you can also try boiling water with vinegar or baking soda. This mixture can help dissolve the blockage in the pipes.

Image credit

Ideally, the first thing you should do is get a plunger. This can be a messy job, so you might want to get some rubber gloves too! With a plunger, push the water down the pipe by creating an airtight seal between the plunger cup and the toilet bowl where it narrows. If the clog is stubborn, you might have to continue with several rounds of plunging before you start to see a result.

If you have tried the plunger method and it hasn’t been effective, you can try placing a wire coat hanger under the water to push out any debris. Then, pull the hanger upward to form a vacuum. Do this for 15 minutes, and after that, the water should start flowing again. If the clog is stubborn, you may need to repeat the process several times.

A wire coat hanger is a great tool to clear a toilet. To use it, you will need to wrap it with duct tape and then bend it into a curved shape. After wriggling gently, try to push the wire down the pipe. Be sure to make sure it hits the obstruction, or it will break the wire hanger. Once you’ve tried these two methods, you’ll be well on your way to clearing your blocked toilet. If you’re not, it’s time to call a plumber! For a Plumber Cheltenham, go to a company such as HPR Services

There are several ways to unblock a toilet without using a plunger and a plumber will have access to such devices, one of which being a snake. Depending on what’s causing the blockage, you can use a toilet plunger, baking soda, or a toilet snake. Depending on the clog, you can try these methods until you get the blockage free. But if none of these methods work, you can always try a different method.

Image credit

If you don’t have a plunger, once the water is released, the wire hanger can then be used as a makeshift toilet snake in case it happens again in the future. The wire hanger can be inserted into the pipe to push debris down. However, if you don’t want to risk damaging your pipes or your toilet, it might be wiser to call out a professional to unblock it for you!

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.